Job Programming; Create A Job - FP FPi 600 Betriebsanleitung

4.

JOB PROGRAMMING

4.1

Create a Job

To create a new job:
1. In the home menu, press the
button.
The Job Wizard starts and helps you to
choose:
- Envelope size. Custom is only available if
defined by the supervisor ("Supervisor
Menu" on page 10).
- If the envelopes should be sealed or not.
- Document size for feeder 1.
- Daily mail or normal documents.
- Document size for feeder 2. If you choose None, you can use feeder 2 as a linked
feeder. This means that when one feeder is empty, the system automatically
starts picking documents from the other feeder.
- Enclosure size (from feeder 3).
- Fold type.
2. Press the 1x button to make sure that the address position is correct (see "Address
Position" on page 26).
3. Press the button to start the job or press the
4. If you press the
a Enter a name for the job. Use the < button to clear a character left of the cursor
position (backspace).
b Press the > button to confirm the job name.
(new job)
button:
button to save the job.
17