Health, Safety And Environment - FP FPi 2000 Betriebsanleitung

1.

HEALTH, SAFETY AND ENVIRONMENT

1.1 Precautions and safety issues
Thoroughly read this operator manual, before using this machine.
According to the European Guideline for machine safety (EC98-37), this operator manual
must be available in the national language(s) of the country where the machine is
delivered.
Therefore, if you do not have an operator manual in your country's language(s), contact
your authorized distributor.
Warnings
• Disconnect the mains supply before performing any maintenance.
Safety precautions
• Only competent personnel should operate this machine.
If incompetent personnel do operate this machine, the manufacturer does not accept
responsibility for any resulting accidents or injuries.
• Only skilled persons, who are aware of the risks involved, may open the protective
covers.
For safety reasons, the machine will not function when the covers are open.
• Keep long hair, fingers, jewelry, etc. away from rotating and moving parts.
• The power connection must be easily accessible, preferably close to the machine.
• For safety reasons, it is essential that the machine is connected to a socket outlet that
has a protective earth connection.
• Over-current protection in the equipment also relies on the branch circuit protection
(max. 20 A).
• The following part(s) is (are) considered the equipment disconnect device(s):
- Power supply cord plug
Precaution
The general process of automated document handling can sometimes create a build up of
static electricity. Therefore we recommend that the following measures are taken to
reduce the side effects of any electrostatic charge.
• Make sure that you operate the system within the recommended temperature and
humidity conditions.
• Make use of antistatic mats where appropriate.
• If necessary, make use of an ionizer to reduce static charge build up in the room where
the system is located.
Please contact your supplier for further information.
3