Service Data - AEG BSE798280M Benutzerinformation

Code and description
F908 - the oven system cannot
connect with the control panel.
When one of these error messages continues to appear on the
display, it means a faulty subsystem may have been disabled. In
such a case contact your dealer or an Authorized Service Centre. If
one of these errors occurs, the rest of the oven functions will
continue to work as usually.
Code and description
F131 - the temperature of the
steamer sensor is too high.
F144 - the sensor in the Water
drawer cannot measure the
water level.
F508 - the Water drawer does
not work properly.
F602, F603 - Wi-Fi is not avail‐
able.

12.3 Service data

If you cannot find a solution to the problem yourself, contact your
dealer or an Authorised Service Centre.
The necessary data for the service centre is on the rating plate. The
rating plate is on the front frame of the oven cavity. Do not remove
the rating plate from the oven cavity.
TROUBLESHOOTING
Remedy
Turn the oven off and on.
Remedy
Turn the oven off and wait until
it cools down. Turn the oven on
again.
Empty the Water drawer and
refill it.
Turn the oven off and on.
Turn the oven off and on.
155/348