Use - AEG BSE798280M Benutzerinformation

• Make sure not to cause damage to the mains plug and to the
mains cable. Should the mains cable need to be replaced, this
must be carried out by our Authorised Service Centre.
• Do not let mains cables touch or come near the appliance door or
the niche below the appliance, especially when it operates or the
door is hot.
• The shock protection of live and insulated parts must be fastened
in such a way that it cannot be removed without tools.
• Connect the mains plug to the mains socket only at the end of the
installation. Make sure that there is access to the mains plug after
the installation.
• If the mains socket is loose, do not connect the mains plug.
• Do not pull the mains cable to disconnect the appliance. Always
pull the mains plug.
• Use only correct isolation devices: line protecting cut-outs, fuses
(screw type fuses removed from the holder), earth leakage trips
and contactors.
• The electrical installation must have an isolation device which lets
you disconnect the appliance from the mains at all poles. The
isolation device must have a contact opening width of minimum 3
mm.
• This appliance is supplied with a main plug and a main cable.

2.3 Use

WARNING!
Risk of injury, burns and electric shock or explosion.
• This appliance is for household (indoors) use only.
• Do not change the specification of this appliance.
• Make sure that the ventilation openings are not blocked.
• Do not let the appliance stay unattended during operation.
• Deactivate the appliance after each use.
SAFETY INSTRUCTIONS
97/348