Troubleshooting; Service Data - AEG 6000 SURROUNDCOOK Benutzerinformation

Step 1
Turn off the oven. Wait until the
oven is cold.
Top lamp
Step 1 Turn the glass cover to remove it.
Step 2 Clean the glass cover.
Step 3 Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4 Install the glass cover.

10. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
10.1 What to do if...
In any cases not included in this table please
contact with an Authorised Service Centre.

10.2 Service data

If you cannot find a solution to the problem yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove the rating plate from the appliance cavity.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
78 ENGLISH
Before you replace the lamp:
Step 2
Disconnect the oven from the
mains.
Problem
The oven does not heat
up.
The lamp does not work.
.........................................
.........................................
.........................................
Step 3
Put a cloth on the bottom of the cav‐
ity.
Check if...
The fuse is blown.
The lamp is burnt out.