AEG BSE798280M Benutzerinformation Seite 149

Top lamp
Step Turn the glass cover to
1 remove it.
Step Remove the metal ring and clean the glass cover.
2
Step Replace the lamp with a suitable 300 °C heat-resistant
3 lamp.
Step Attach the metal ring to the glass cover and install it.
4
Side lamp
Step Remove the left shelf support to get access to the lamp.
1
Step Use a Torx 20 screwdriver to remove the cover.
2
Step Remove and clean the metal frame and the seal.
3
Step Replace the lamp with a suitable 300 °C heat-resistant
4 lamp.
Step Install the metal frame and the seal. Tighten the screws.
5
Step Install the left shelf support.
6
CARE AND CLEANING
149/348