Transport; Storage; Care And Maintenance; Maintenance Intervals - Kärcher B 110 R Originalbetriebsanleitung

Adjusting the cleaning head
1. Turn the info button until "Brush head" is
displayed in the menu.
2. Press the Info button.
3. Turn the info button until the type of the
built-in cleaning head is highlighted.
"Roll" = R cleaning head
"Disc" = D cleaning head
4. Press the Info button.
Speed-dependent water dosing
If the speed-dependent water dosing is
switched on, the brush irrigation changes
proportionally with the speed.
The water dosing is also influenced by the
setting of the respective cleaning program
(0 ... 100%).
2
Setting ON [ml/m ]
0% 0
10% 7.5
20% 15
30% 22.5
40% 30
50% 37.5
60% 45
70% 52.5
80% 60
90% 67.5
100% 75
Set speed-dependent or constant water
dosing:
1. Turn the info button until "Water dosage"
is shown on the display.
2. Press the Info button.
3. Turn the info button until the desired
function is highlighted.
4. Press the Info button.
After-running time
1. Turn the info button until the menu item
"After-running times" is shown on the
display.
2. Press the Info button.
3. Turn the info button until the desired as-
sembly is highlighted.
4. Press the Info button.
5. Turn the info button until the desired af-
ter-running time is displayed.
6. Press the Info button.
Setting the language
1. Turn the info button until the menu item
"Language" appears on the display.
2. Press the Info button.
3. Turn the info button until the desired lan-
guage is highlighted.
4. Press the Info button.
Key management
The menu item "Key menu" enables au-
thorizations for yellow Intelligent Keys and
the language of the display.
1. Insert the grey Intelligent Key.
2. Turn the info button until the menu item
"Key menu" appears on the display.
3. Press the Info button.
4. Remove the grey Intelligent Key and in-
sert the yellow Intelligent Key to be per-
sonalized.
26
5. Select the menu item to be changed by
turning the info button.
6. Press the Info button.
7. Select the setting of the menu item by
turning the info button.
8. Confirm the setting by pressing the
menu item.
9. Select the next menu item to be
changed by turning the info button.
10.After all settings have been made, call
up the "Save?" menu by turning the info
button.
11.Press the Info button.
The authorizations are saved.
The "Continue key menu" display ap-
pears.
● Yes: Program another Intelligent Key
OFF[l/min] ● No: Exit the key menu
12.Press the Info button.
0
0.675 Switch attachment kits on / off
1. Turn the info button until the desired at-
1.35
tachment kit is shown on the display.
2.025
2. Press the Info button.
2.7
3. Turn the info button until the desired
3.375
function of the attachment kit is dis-
4.05
played.
4.725 4. Press the Info button.
5.4
6.075
The factory settings for all cleaning param-
eters are restored.
6.75
1. Turn the info button until the "Factory
setting" menu item displayed.
2. Press the Info button.
3. Turn the Info button until "Yes" is high-
lighted.
4. Press the Info button.
Adjusting parameters for cleaning
All parameters for cleaning programs are
retained until another setting is selected.
1. Set the program switch to the desired
cleaning program.
2. Press the Info button.
The first adjustable parameter is dis-
played.
3. Press the Info button
The adjusted value flashes.
4. Set the desired value by turning the Info
button.
5. Confirm the changed setting by pressing
the Info button or wait until the set value
is automatically accepted after 10 sec-
onds.
6. Select the next parameter by turning the
Info button.
7. After changing all desired parameters,
turn the Info button until "Exit menu" is
displayed.
8. Press the Info button.
The menu is exited.
DANGER
Driving on slopes
Risk of injury
Observe the maximum permissible gradi-
ent when driving the device on slopes for
Factory setting
programs

Transport

English
loading and unloading purposes (see chap-
ter "Technical data").
Drive slowly.
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during
transportation.
1. With the D cleaning head installed, re-
move the disc brushes from the brush
head.
2. When transporting in vehicles, secure
the device against slipping and tipping
over according to the applicable guide-
lines.

Storage

CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during
storage.
ATTENTION
Frost
Destruction of the device through freezing
water
Drain all water from the device.
Store the device in a frost-free location.
● This device may only be stored indoors.
● Fully charge the batteries before storing
them for a long period.
● Fully charge the batteries at least every
month during storage.

Care and maintenance

DANGER
Inadvertently starting up device
Risk of injury, electric shock
Turn the program switch to the "OFF" posi-
tion.
Remove the Intelligent Key prior to all work
on the device.
Pull out the charger mains plug.
Unplug the battery connector.
 Drain and dispose of the waste water
and fresh water.

Maintenance intervals

Each time after use
ATTENTION
Improper cleaning
Risk of damage.
Do not spray the device with water.
Do not use aggressive cleaning agents.
A detailed description of the individual
maintenance work is provided in the chap-
ter "Maintenance Work".
 Drain the waste water.