Strack PowerMax SN5650-PMU-0330 Bedienungsanleitung Seite 79

PowerMax cam unit SN5650-PMU-0330 — SN5650-PMU-1200
Bronze with solid lubricant
Please consider the lubrication hints to increase the running life of the low-maintenance sliding elements.
The guide plates are always engaged with a sliding partner out of hardened steel. Please absolutely avoid damages of
the sliding surfaces by impacts on the sliding face or cants during the mounting/dismounting of the cams.
Please look after the cleanness of the sliding surfaces. Damages or impurities may possibly lead to scuffing marks during
operation. To maintain the soft running you should exchange the low-maintenance slide rails when they are damaged.
The hardened steel rails are adapted to the respective guide clearance of the cam and should not be exchanged in the
normal case. The low-maintenance sliding elements have a high accuracy, so that replacement rails should be introduced
without subsequent work. You will receive exact indications and exploded assembly drawings in the Internet under
www.strack.de
Low-maintenance sliding elements out of bronze with solid lubricant:
In normal case lubrication is not necessary.
In case of need, lubrication may only be effected with the following lubricants:
The lubricants can also be used for the relubrication of the SNS sinter metal
Company
STRACK
AGIP
BP
ESSO / Mobil
ESSO / Mobil
Castrol
SHELL
STRACK NORMA GmbH & Co. KG · Königsberger Str. 11 · D-58511 Lüdenscheid · Tel +49 2351 8701-0 · www.strack.de
Comparison of application
Hints
Oils
Z9084
Rotra ATF
Autran DX III
ATF 320
ATF 220
ATF DEX II
Spirax S1 ATF TASA
I
Operating instructions -- PowerMax cam unit PMU
SNS Sinter metal
max.°C Fats
240
Z9080
100
Agip GR MU 2
100
Energrease
100 Nebula EP2
100
Beacon EP2
100 Tribol GR 4020 PD
80
Retinax LX
PowerMax
max.°C
140
120
140
120
130
150
140
33