Information Of The Lock-Out-System 5654-Los - Strack PowerMax SN5650-PMU-0330 Bedienungsanleitung

PowerMax
I
Operating instructions -- PowerMax cam unit PMU
PowerMax cam unit SN5650-PMU-0330 — SN5650-PMU-1200
10.2.1 Information of the Lock-Out-System SN5654-LOS
Distribution of force:
The new developed lock out system makes it
possible to fix the corresponding standard cam
free of play in its front end position. In doing so,
the cam body is screwed with the cam reception.
The special thing is that the clamping screws act
under an angle on the corresponding bearing
face.
That means the cam body is once pulled by the
divided (resulting) force against the prismatically
arranged guide rails and at the same time is
pulled against the pressure piece.
Now the cam body is positioned free of play exactly
in its front end position and is prepared for addi-
tional machining.
Please consider that the Lock-out-System can only be used in dismounted standard cams.
At the most Power-Max standard cams the fixing holes are partly covered, if the cam body is in the front
end position.
24
STRACK NORMA GmbH & Co. KG · Königsberger Str. 11 · D-58511 Lüdenscheid · Tel +49 2351 8701-0 · www.strack.de