Conversion From Self Closing Loading Door To Non-Self Closing And Viceversa; Hinged Loading Doors - Spartherm Premium V-FD-87h Aufbauanleitung

1.2 CONVERSION FROM SELF CLOSING LOADING
DOOR TO NON-SELF CLOSING AND VICEVERSA

1.2.1 HINGED LOADING DOORS

Conversion of a self closing hinged door to a non - self closing door
by relieving the door spring.
1
Securing split-pin
2 4
Lock screw
3a
5
Securing split-pin
3b
GB 6
1. Remove the securing split-pin bet ween
the frame and door.
2. Secure the door locking spring (Allen key
2.5). Tighten the locking screw located at
the bottom right in the corner of the door
at the bot tom pivot point. This may be
located a little under the grey cord seal.
Be careful to not damage the seal!
3. Take out the loading door
4. Relieve the locking screw (Allen key 2.5).
A significant clicking sound should be
heard.
5. Place the loading door back and mount
the securing split-pin.