Approvals / Conformity; Used Norms - ABS s.cape Bedienungsanleitung

ATTENTION: This product may only be used by trained
persons or under the direct supervision of a trained
person. After a hard fall (fall factor >=1) the harness
must be removed immediately. It should be noted that
wetness and icing reduce the strength of a climbing
harness.
16.5.6 CHANGES, REPAIRS
Any changes, additions or repairs must not be carried
out by the user, but only by authorities supervised by
the manufacturer.
16.6 APPROVAL / CONFORMITY
The service life and functionality of the entire equip-
ment depends on the degree of use. If the described
maintenance intervals are observed, we recommend
replacement after a 10-year service life.
Manufacturer: ABS Protection GmbH
Gundelindenstraße 2, 80805 Munich, Germany
Country of manufacture: Germany
Type: ABS avalanche airbag system with integrated
high tour belt
64 English
Inspecting authority:
TÜV Süd Product Service GmbH, Daimlerstr. 11,
85748 Garching. Prüfstellennummer 0123.
Monitoring authority:
TÜV Süd Product Service GmbH, Daimlerstr. 11,
85748 Garching. Prüfstellennummer 0123.
The ABS Protection GmbH is a
ISO 9001: 2015 certified company.

16.7 USED NORMS

DIN EN 12277:2018
PSA-V (EU) 2016/425
Internet address for certificate of conformity:
www.abs-airbag.com/konformitätserklärung