During Each Tour Or Operation Of The System; At The End Of Each Tour - ABS s.cape Bedienungsanleitung

4. The airbags are stored
in their appropriate pou-
ches. The zippers must
be at the upper and lower
end of the zipper before
the airbags are folded in.
Once the airbags are in
the pouch, pull the zippers
to the middle then pull
back to the end to close
them. The Velcro can then
be closed.
STEP 12
REPLACE CARTRIDGE AND ACTIVATION HANDLE.
After every activation the cartridge and the activation
handle must be replaced. Proceed according to step
1, 2 and 4, 5. The ABS-System is then once again
operational.
4.2 Before every tour or use
Follow steps 1– 6 of the Initial Operation
1 Checking cartridge weight
2 Attaching cartridge
3 Attaching straps and belts
4 Checking activation handle
5 Attaching activation handle
6 Velcro closure
4.3 At the end of the tour
Follow step 8 Removing activation handle of the Initial
Operation. The cartridge can remain attached.
English 47