Avtech avc792pv Bedienungsanleitung Seite 80

‧ 8CH
* The D-Sub connector shown above is optional.
PIN
1
2~5
6 ~ 11
12
13
14
15~18
19~23
24
25
Downloaded from www.Manualslib.com
FUNCTION
GND GROUND
Connect ALARM INPUT (PIN 2 – 5) and GND (PIN 1) connector with
wires. Once an alarm is triggered, the DVR will start recording and the
buzzer will be on.
ALARM INPUT
*
PIN OFF NA
RS485-A
Under the normal operation, COM disconnects with NO. But when any
EXTERNAL ALARM NO. alarm is triggered, COM connects with NO.
Attention: The voltage restriction is under DC24V 1A.
PIN OFF NA
Connect ALARM INPUT (PIN 15 – 18) and GND (PIN 1) connector with
wires. Once an alarm is triggered, the DVR will start recording and the
buzzer will be on.
ALARM INPUT
*
PIN OFF NA
RS485-B
Under the normal operation, COM disconnects with NO. But when any
EXTERNAL ALARM
alarm is triggered, COM connects with NO.
COM
Attention: The voltage restriction is under DC24V 1A.
manuals search engine
Siren:
When the DVR is triggered by alarm or motion, the
COM connects with NO and the siren with strobe
starts wailing and flashing.
Magnetic Contact:
When the magnetic contact is opened, the alarm
will be triggered and the recording is on.
DESCRIPTION
PIN Alarm Corresponding video channel
PIN 2 1 CH1
PIN 3 3 CH3
PIN 4 5 CH5
PIN 5 7 CH7
PIN Alarm Corresponding video channel
PIN 15 2 CH2
PIN 16 4 CH4
PIN 17 6 CH6
PIN 18 8 CH8
74
APPENDIX 6 PIN CONFIGURATION