Gui Display With Usb Mouse Control; Connect Usb Mouse; Quick Menu Bar - Avtech avc792pv Bedienungsanleitung

3. GUI DISPLAY WITH USB MOUSE CONTROL

3.1 Connect USB Mouse

Connect your USB mouse to one of the USB ports on the DVR front panel, and check if
there's a mouse icon (
Move your mouse to enter the DVR password with the password keypad. The default
administrator password is 0000. The status will be changed from
(administrator), and the quick menu bar appears on the left side of the screen.
Note: There are two user levels for DVR access which can be set in the main menu
Password Input

3.2 Quick Menu Bar

Move to the arrow mark to extend the quick menu bar and show the five functions as
follows:
Quick Menu: Open
Downloaded from www.Manualslib.com
) on the screen, indicating the USB mouse is detected properly.
"SYSTEM"  "TOOLS". For details, please refer to "4.4 User Level Switch" at
page 17.
Quick Menu: Close
manuals search engine
GUI DISPLAY WITH USB MOUSE CONTROL
Click to show the channel switch panel and
select the channel you want. For details,
please refer to "3.2.1 Channel Switch" at
page 13.
Click to display the playback control panel,
and click to play the latest recorded
video clip, or click
For details, please refer to "4.3 Playback" at
page 16.
Switch to the channel you want first, and click
to enter the zoom-in mode. In this mode,
click and drag the red frame on the bottom left
of the screen to move to the place you want
to see. To exit this mode, click .
12
(key lock) to
to enter the search list.