Schedule Setting; Record Timer - Avtech avc792pv Bedienungsanleitung

4)
5)
6)
7)
8)

5.4 Schedule Setting

Right-click to display the main menu, and select "SCHEDULE SETTING".

5.4.1 Record Timer

Click "RECORD". In "RECORD TIMER", select "ON" to enable record timer, and select
the day and time for this function.
RECORD
DETECTION
ALARM
X axis
Y axis
Downloaded from www.Manualslib.com
PRE-ALARM RECORD
Select to enable or disable the pre-alarm function (ON / OFF).
When pre-alarm and event recording functions are both activated, the DVR will
record 8MB data before an alarm / motion event is triggered.
OVERWRITE
Select "ON" to overwrite previous recorded data in your HDD when the HDD is full.
When this function is on and the HDD is full, the DVR will clear 8GB data from the
oldest for continuous recording without notice.
EVENT RECORD ALL CH.
Select to record all channels (ON) or record the channel with an event only (OFF)
for any event.
KEEP DATA LIMIT (DAYS)
Assign the maximum recording days from 01 to 31 after which all the recorded data
will be removed, or select "OFF" to disable this function.
RECORD CONFIG
Please refer to "5.3.1 Quick record setting".
RECORD TIMER
0
SUN
MON
TUE
WED
THU
FRI
SAT
EXIT
0 ~ 24 hours. Each time bar is 30 minutes.
Monday ~ Sunday.
manuals search engine
SCHEDULE SETTING
2 4 6 8 10
25
FREQUENTLY-USED FUNCTIONS
ON
12 14 16 18 20 22 24