Main Menu - Avtech avc792pv Bedienungsanleitung

3.3 Main Menu

Right-click anywhere on the screen to show the main menu as follows, and right-click
again to exit.
For details about the menu structure, please refer to "APPENDIX 4 MAIN MENU
STRUCTURE" at page 69.
Main Menu
Downloaded from www.Manualslib.com
Camera Menu
Enter
/ / /
Up / Down / Left /
Right
/
Iris + / Iris -
Zoom in / out max
/
Zoom in / out
/
Focus near / far
/
Auto mode
Preset point
manuals search engine
GUI DISPLAY WITH USB MOUSE CONTROL
Click to enter the camera main menu.
For details about each camera menu, please refer to its
own user manual.
Click to confirm your selection / enter the menu.
Click to move your selection up / down / left / right, or
change settings.
This two buttons are designed for the PTZ camera
which uses Pelco-D to control. To know the actions after
clicking Iris + and Iris -, please refer to the camera's
user manual.
Click to zoom in on the image to the largest / zoom out
on the image to its original size.
Click to zoom in / out the image.
Click to adjust the focus of the image.
Click to activate the auto function.
Before using it, you need to assign a specific function
that will be enabled when "
please refer to the user manual of the PTZ camera.
Click to enter the PTZ preset point you want to see.
Click to set the status display, image
QUICK START
settings, and date & time.
Click to set the date display and
DATE SETUP
daylight saving.
SYSTEM Click to set the system configurations.
EVENT
Click to enter the event search menu.
INFORMATION
Click to set CAMERA, DETECTION,
ADVANCED
ALERT, NETWORK, DISPLAY,
CONFIG
RECORD, DEVICES & NOTIFY.
SCHEDULE Click to set record timer, detection
SETTING timer & alarm timer.
.
14
" is clicked. For details,