Channel Switch; Ptz Control Panel - Avtech avc792pv Bedienungsanleitung

3.2.1 Channel Switch

Click
Note: The buttons available depend on the model you have.
1~16

3.2.2 PTZ Control Panel

Note: In the PTZ control mode, hot point is supported to move the camera view to
Click
Downloaded from www.Manualslib.com
on the quick menu bar to display the panel as follows:
Video Channel Number
Sequence Display
Quad Display
9-Cut Display
16-Cut Display
the specified point after a click.
on the quick menu bar to display the panel as follows:
manuals search engine
GUI DISPLAY WITH USB MOUSE CONTROL
Click to select the audio channel you want:
In the live mode, only the live audio channels
can be selected.
In the playback mode, live and playback
audio channels can be selected.
Click to enter the PTZ mode and show the
PTZ camera control panel. For details, please
refer to "3.2.2 PTZ Control Panel" at page 13.
Click to show the power off panel to either
halt or reboot the system.
Click to switch to the channel you want in full screen.
Click to display each channel in full screen one by one starting
from CH1. When the last channel is displayed, it will repeat from
CH1 again.
When this function is on,
Press to show the 4-channel display mode.
Press to show the 9-channel display mode.
Press to show the 16-channel display mode.
13
will be shown on the status bar.