Scope Of Delivery - Bosch Rexroth ErgoSpin Montageanleitung

3608870DD4/2015-09 | ErgoSpin/CC-ErgoSpin

Scope of delivery

• Maintain the hand-held nutrunner with
care. Check that moving parts of the de-
vice function properly and are not sticking.
Also check whether parts are broken or
damaged to the extent that they impair
proper functioning of the hand-held nutrun-
ner. Have damaged parts repaired before
using the hand-held nutrunner.
• Use the hand-held nutrunner, accessories,
attachment tools etc. in accordance with
these instructions and as instructed for this
specific device type. Take into account the
working conditions and the task you are to
perform.
• Do not use the angle heads on the
ESA...S, ESV, CC-ESA...S and CC-ESV
systems as handles because the angle
heads are not provided for this purpose.
The angle heads on ESA..G systems fea-
ture a special safety device that prevents
textile fibers close to the angle head from
being sucked in. These angle heads may
be used as an additional handle.
Bosch Rexroth AG
3 Scope of delivery
ESA...S/ CC-ESA...S
Right-angle nutrunner with angle head
ESA...G
Right-angle nutrunner with plastic-sheathed
angle head
ESV/ CC-ESV
Standard machine without output drive with
zero-play spur gearing
ESM/ CC-ESM
Pistol grip nutrunner with integrated tighten-
ing position illumination
In addition to standard output drives, it is also
possible to produce and use special compo-
nents, e.g. planetary gearboxes for high
torques, for ESV, CC-ESV012 and
ESM025HT.
The scope of delivery moreover includes as-
sembly instructions for the ErgoSpin/
CC-ErgoSpin hand-held nutrunner
75/110