Assembly - Bosch Rexroth ErgoSpin Montageanleitung

3608870DD4/2015-09 | ErgoSpin/CC-ErgoSpin

Assembly

6 Assembly
CAUTION
The product is not protected against
incorrect assembly/disassembly!
Risk of injury and damage to the device
during subsequent operation.

Assemble/disassemble the product
according to the following information
and in the correct order.

Only qualified personnel are autho-
rized to assemble/disassemble the
product.

Do not clamp the hand-held nutrunner
in a vise or similar.

Disconnect the plug from the socket
before assembling/disassembling ac-
cessories.
Bosch Rexroth AG
CAUTION
Improper handling!
Under unfavorable conditions, handling or
assembling/disassembling specific parts
and components in an unsuitable manner
can cause injuries. Injury due to crushing,
shearing, cutting, impact!

Observe the general construction and
safety regulations for handling and as-
sembly/disassembly.

Use suitable assembly/disassembly
and transport equipment.

Prevent trapping and crushing injuries
by taking appropriate steps.

Only use suitable tools.

Use special tools if such are speci-
fied.

Use tools appropriately.

If necessary, use suitable protective
equipment (e. g. protective goggles,
safety shoes, protective gloves).

Do not stand under suspended loads.

Lay cables and lines in accordance
with the permissible bending radiuses
so that they cannot be damaged and
no one can trip over them.
77/110