3608870DD4/2015-09 | ErgoSpin/CC-ErgoSpin
Disposal
12
Disposal
12.1 Environmental protection
Manufacturing process
The products are produced using manufac-
turing processes that are optimized in terms
of energy and raw material and simultane-
ously allow for reuse and recycling of the pro-
duced waste. We regularly try to replace pol-
luted raw, auxiliary and operating materials
with environmentally friendly alternatives.
Prohibited substances
We guarantee that our products do not con-
tain any substances included in the Chemi-
cals Prohibition Ordinance. We moreover de-
clare that our products are free from mercury,
asbestos, PCB and chlorinated hydrocar-
bons.
No release of hazardous substances
Our products do not contain any hazardous
substances that could be released while they
are used as intended. Normally, you therefore
do not have to fear negative consequences
for the environment.
Bosch Rexroth AG
Material components
Table 10 on page 91 shows the components
that are basically contained in our products.
Tab.10: Main components of the products
ErgoSpin
Steel
Aluminum
Copper
Plastics
Magnetic materials
Electronic components and assemblies
Further, the product may not contain any im-
proper foreign substances or foreign compo-
nents when it is returned.
Please send the products carriage paid to
the following address:
Bosch Rexroth AG
Schraub- und Einpress-Systeme
Fornsbacherstr. 92
71540 Murrhardt, Germany
These instructions have been printed on re-
cycled paper free of chlorine.
91/110