Bosch Rexroth ErgoSpin Montageanleitung Seite 107

3608870DD4/2015-09 | ErgoSpin/CC-ErgoSpin
Appendix
Tab.25: Basic requirements according to the Machinery Directive 2006/42/EC, annex I
No. Requirement
3.5 PROTECTION AGAINST OTHER
HAZARDS
3.5.1 Batteries
3.5.2 Fire
3.5.3 Emissions of hazardous substances
3.6 INFORMATION AND INDICATIONS
3.6.1 Signs, signals and warnings
3.6.2 Marking
3.6.3 Operating instructions
3.6.3.1 Vibrations
3.6.3.2 Multiple uses
4. Supplementary essential safety and
health requirements to offset hazards due to lifting
operations
4.1 GENERAL
4.1.1 Definitions
4.1.2 Protection against mechanical hazards
4.1.2.1 Risks due to lack of stability
4.1.2.2 Machinery running on guide rails and rail tracks
4.1.2.3 Mechanical strength
4.1.2.4 Pulleys, drums, wheels, ropes and chains
4.1.2.5 Lifting accessories and their components
4.1.2.6 Control of movements
4.1.2.7 Movements of loads during handling
4.1.2.8 Machinery serving fixed landings
4.1.2.8.1 Movements of the carrier
4.1.2.8.2 Access to the carrier
4.1.2.8.3 Risks due to contact with the moving carrier
4.1.2.8.4 Risks due to the load falling off the carrier
4.1.2.8.5 Landings
4.1.3 Fitness for purpose
Bosch Rexroth AG 107/110
applied satisfied
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –