Display Of Information; Safety Instructions - Bosch Rexroth ErgoSpin Montageanleitung

3608870DD4/2015-09 | ErgoSpin/CC-ErgoSpin
About this document
Tab.1: Required and additional documentation
Title
Safety Instructions for Rexroth
Tightening Systems
Documentation of the machine or system manu-
facturer
Instructions for the other system components
Generally applicable, legal and other binding regu-
lations of European and national legislation
Provisions for accident prevention and environ-
mental protection applicable in your country
DIN 13 sheet 13
1.3

Display of information

In order to enable you to work with your prod-
uct in a fast and safe way, uniform safety in-
structions, symbols, terms and abbreviations
are used. For a better understanding, they
are explained in the following sections.

1.3.1 Safety instructions

In this documentation, any sequence that en-
tails a risk of personal injury or damage to
equipment is preceded by safety instruc-
tions. The hazard avoidance measures de-
scribed must be observed.
Bosch Rexroth AG
Document number Document type
3 608 870 2DE
Safety instructions are structured as follows:
SIGNAL WORD
Type of hazard
Consequences of failure to follow the
safety instructions

Hazard avoidance
• Warning symbol:
hazard
• Signal word: identifies the severity of the
hazard, see Table 2 on page 66
• Type of hazard: identifies the type or
source of the hazard
• Consequences: describes the conse-
quences of failing to comply with the safety
instructions
• Precautions: indicates how the hazard
can be avoided
65/110
Safety regulation
alerts the user to the