Decommissioning - Bosch Rexroth ErgoSpin Montageanleitung

88/110 Bosch Rexroth AG

Decommissioning

ErgoSpin connecting cable
The connecting cables are maintenance-free
for 500 plugging cycles, see section "9.3
Maintenance schedule" on page 87.
The rotary plugs of the AWD... and ALWD...
connecting cables have undergone fatigue
testing for 500,000 rotation cycles with an
angle of turn of +/ 90° from the neutral posi-
–
tion.
10 Decommissioning
After having decommissioned the
tightening system, wait at least
3 minutes before switching it on
again.
Proceed as follows to decommission the
hand-held nutrunner:

Switch off the controller.
The LEDs on the controller and the hand-held
nutrunner turn dark.
ErgoSpin/CC-ErgoSpin | 3608870DD4/2015-09