Extension And Conversion; Output Drives For Esv - Bosch Rexroth ErgoSpin Montageanleitung

92/110 Bosch Rexroth AG

Extension and conversion

13 Extension and conver-
sion
The components of the ErgoSpin/
CC-ErgoSpin hand-held nutrunner may not
be converted, i.e., the components may nei-
ther be opened nor disassembled nor may
the mechanical properties (dimensions,
holes, etc.) be changed. In case of non-com-
pliance, the warranty claim will be forfeited.

13.1 Output drives for ESV

Tab.11: ESV angle heads
Order number (...S)
Order number (...G)
**)
Max. torque [Nm]
Typical efficiency
Reduction ratio
Tool mount
Order number (...S)
Order number (...G)
Max. torque **) [Nm]
Typical efficiency
Reduction ratio
Tool mount
*)
Can also be used with CC-ESV
**)
Value refers to angle head
ErgoSpin/CC-ErgoSpin | 3608870DD4/2015-09
*)
WH013S WH040S
WH013G WH040G
3 608 876 051 3 608 876 055
3 608 876 052 3 608 876 056
13
η = 0.95 η = 0.95
i = 1.095 i = 1.73
1/4'' square 3/8'' square
WH075S
WH100S
WH075G
3 608 876 061 3 608 876 063
3 608 876 062
75
η = 0.95 η = 0.95
i = 1.563 i = 1.421
1/2'' square 1/2'' square
WH056S
WH056G
3 608 876 057
3 608 876 058
40 56
η = 0.95
i = 1.16
3/8'' square
WH150S
3 608 876 064
- -
100 150
η = 0.95
i = 1.095
1/2'' square
WH065S
WH065G
3 608 876 059
3 608 876 060
65
η = 0.95
i = 1.35
1/2'' square
WH220S
3 608 876 065
-
220
η = 0.95
i = 1.588
3/4'' square