Attachment To The Declaration Of Incorporation - Bosch Rexroth ErgoSpin Montageanleitung

102/110 Bosch Rexroth AG
Appendix
The partly completed machinery may
only be commissioned if it has been de-
termined that the machinery into which
the partly completed machinery is to be
installed corresponds to the provisions
of the EC Machinery Directive 2006/42/
EC if applicable according to this direc-
tive.
Murrhardt , 2015/08/24
Location
16.4.1 Attachment to the declaration
of incorporation
Table 25 on page 103 contains the basic
safety and health protection requirements ac-
cording to the Machinery Directive 2006/42/
EC, Annex I.
Notes on Table 25 on page 103:
• Under "applied", the following characters
have the following meaning:
– "X": The requirement is applicable and
relevant for the product.
– "–": The requirement is not applicable
and not relevant for the product.
• Under "satisfied", the following characters
have the following meaning:
– "X": "yes, satisfied"
– "–": "not satisfied"
by
proxy
Date Harald Lukosz
DC-IA/EWT
ErgoSpin/CC-ErgoSpin | 3608870DD4/2015-09
The following person is authorized to compile
the relevant technical documents:
Name: Manuel Rieger
Address: Bosch Rexroth AG
Electric Drives and Controls
DC-IA/EWT2
Fornsbacher Str. 92
71540 Murrhardt
Germany
by
proxy
Martin Doelfs
DC-IA/SWT