Switching Bluetooth Off/On Using The Cockpit App; Querying The Prosthesis Status; Query Status Through Cockpit App; Status Display In The Cockpit App - Ottobock Genium 3B1-2 Gebrauchsanweisung

INFORMATION
Basic mode (mode 1) has to be active to turn off Bluetooth. If a MyMode is activated, one has to switch to basic
mode to turn off Bluetooth.

9.4.1 Switching Bluetooth off/on using the cockpit app

Switching off Bluetooth
1) When the component is connected, tap the symbol in the main menu.
→ The navigation menu opens.
2) In the navigation menu, tap the entry "Functions".
3) Tap the entry "Deactivate Bluetooth".
4) Follow the on-screen instructions.
Switching on Bluetooth
1) Rotate the component or connect/disconnect the battery charger.
→ Bluetooth is switched on for approx. 2 minutes. During this time, the app must be started in order to estab­
lish a connection to the component.
2) Follow the on-screen instructions.
→ If Bluetooth is switched on, the

9.5 Querying the prosthesis status

9.5.1 Query status through cockpit app

1) When the component is connected, tap the symbol in the main menu.
2) In the navigation menu, tap the entry "Status".

9.5.2 Status display in the cockpit app

Menu option
Trip
Step
Service
Batt.
Stb/Act: 58/29

9.5.3 Status information on the display of the remote control (optional accessory)

Menu option
Trip
Step
Batt.
Stb/Act: 58/29
Service
Mute: On
Genium 3B1-2/3B1-2=ST
symbol appears on the screen.
Description
Daily step counter (steps with the
prosthesis side)
Total step counter (steps with the
prosthesis side)
Display of the next maintenance date For informational purposes only
Current prosthesis charge level, as a
percentage
Estimated remaining operating time
of prosthesis in hours. Rest mode
(Stb) e.g. 58 hours, active use (Act)
e.g. 29 hours
Description
Daily step counter
(Steps with the prosthesis side)
Total step counter
(Steps with the prosthesis side)
Current prosthesis charge level, as a
percentage
Estimated remaining operating time
of prosthesis in hours. Rest mode
(Stb) e.g. 58 hours, active use (Act)
e.g. 29 hours
Display of the next maintenance date For informational purposes only
Turn mute mode (silent mode) of the
prosthesis on or off. The current
status is displayed.
Possible actions
Reset the counter by tapping the
"Reset" button.
For informational purposes only
For informational purposes only
For informational purposes only
Possible actions
Reset the counter by using the key
to confirm the menu option
For informational purposes only
For informational purposes only
For informational purposes only
Mute mode can be turned on or off
by confirming the menu point with
the key (see Page 84).
Use
Ottobock | 83