Menu Iso Advanced: Setting Of The Extended Functions; External Coupling Devices (Agh: No) - Bender ISOMETER IRDH275 Handbuch

6.5 Menu ISO ADVANCED: Setting of the extended
functions
6.5.1

External coupling devices (AGH: no)

Basic setting "no", when no coupling device is used (factory setting).
AGH: 204 AK80
Terminal AK of the IRDH275 is connected to terminal AK80 of the
AGH204S-4. The nominal voltage range is extended to 3AC 0...1650 V. Only
current converters with an output voltage not exceeding DC 1000 V are al-
lowed to be connected (see "operation with coupling device" on page 34).
AGH: 520S
Terminal AK of the IRDH275 is connected to terminal 5 of the AGH520S. The
nominal voltage range is extended to AC 0...7200 V. Only current converters
with an output voltage not exceeding DC 1000 V are allowed to be connected.
AGH: 204 AK160
Terminal AK of the IRDH275 is connected to terminal AK160 of the
AGH204S-4. The nominal voltage range is extended to 3AC 0...1300 V. Only
current converters with an output voltage not exceeding DC 0...1840 V are al-
lowed to be connected (see page 34).
AGH: 150 AK160
Terminal AK of the IRDH275 is connected to terminal AK160 of the
AGH150W-4. The nominal voltage range is extended to DC 0...1760 V.
54
The coupling monitoring is deactivated when an external
coupling device is connected.
Operation and setting
IRDH275_D00122_03_M_XXEN/05.2017