Intended Use - Bender ISOMETER IRDH275 Handbuch

2.4 Intended use

The ISOMETER® is intended for:
• monitoring the insulation resistance of IT systems
Use for the intended purpose also includes
• compliance with all information in the operating instructions, and
• compliance with test intervals.
In order to meet the requirements of the applicable standards, customised pa-
rameter settings must be made on the equipment in order to adapt it to local
equipment and operating conditions. Please heed the limits of the range of
application indicated in the technical data.
Any use other than that described in this manual is regarded as improper.
16
IRDH275_D00122_03_M_XXEN/05.2017
Safety instructions