sematic DRIVE SYSTEM Bedienungsanleitung Seite 8

1 PREFACE
This manual has been drafted taking into account that the Company installing genuine
Sematic products will comply with the following necessary requirements:
• personnel responsible for the installation and/or maintenance of the doors must be fami-
liar with the General and Specific regulations in force on the subjects of work safety and
hygiene (89/391/CEE - 89/654/CEE - 89/656/CEE);
• personnel responsible for the installation and/or maintenance must be familiar with the
Sematic product and must have been trained by Sematic or by an authorized Sematic
agent;
• installation equipment used must be in good working order with all measuring instruments
calibrated (89/655/CEE).
Sematic:
• undertakes to update the present manual and send the customer copies of all new
updates together with material;
• within its continuous product improvement policy, reserves the right to make
changes to the designs and materials of its products. Sematic will give an agreed
reasonable time to all its customers to allow them to adapt to the new changes
their complementary current constructions;
• guarantees a good performance only of the original parts sold directly and cor-
rectly installed.
Therefore:
parts manufactured and/or added to the Sematic product without his direct control, or non-
original parts based upon a Sematic design (even if supplied by authorised agents) cannot
be considered under guarantee since the following conditions have not been ensured:
1 Quality control of raw material supply
2 Process control
3 Product control
4 Conformity tests according to Sematic specifications
Furthermore, Sematic:
• guarantees the performance life of its products only if correctly stored (indoors storage at
temperatures ranging between -10 and +60 °C out of direct sunlight) and correctly instal-
led;
• guarantees the perfect performance of the products installed in environments with
temperatures between -10 and +60 °C and with a non-condensing, relative humi-
dity level included between 20% and 80%.
(Special note: for temperatures and humidity rates outside these ranges, please
consult our Technical Dept.)
The present document has been drafted in accordance with the following EU Directives:
• 98/37/CE Machinery Directive and subsequent modifications (when applicable)
• 95/16/CEE Lifts Directive
• 93/68/CEE Markings
• 90/269/CEE Heavy loads handling
• Noise (Acoustic emission) 86/188/CEE modified according to Directive 98/24/CEE
• Electromagnetic compatibility 89/336/CEE
and with the following particular standards:
• EN81; (+)
• AS1735; (+)
© SEMATIC All rights reserved
Changes can be made without notice
see www.sematic.com for latest release
infosem@sematic.com
7
w w w . s e m a t i c . c o m