General Options - sematic DRIVE SYSTEM Bedienungsanleitung

9 GENERAL OPTIONS

• Connect the handset to RJ45 connector;
• If necessary, using keys
"OK" key or confirm the suggested language with "OK"
• Using keys and
• Press OK to confirm the choice
• The GENERAL OPTION menu allows the Door Controller to operate by means of the fol-
lowing parameter options:
• REVERSING SYSTEM
• MAIN LIFT CONTROLLER TEST
• NO MLC SIGNAL
• MLC INPUT ALARM
• LIMITED DOOR REVERSAL
• CAR DOOR LOCKING DEVICE
• GLAZED PANELED DOORS
• AUX OUTPUT RELAY
• FIRE FIGHTING OPTIONS
• EOD TIMEOUT
• PROTECTIVE DEVICE LOGIC
• CLOSING ROTATION
These parameter meanings and settings are detailed in the following paragraphs.
9.1 Reversing System Setting by means of the Handset
• See § 6.2 for the meaning of this parameter
• Using keys and
REVERSING SYSTEM
• Press the "OK" key to confirm the choice
• The following options are viewed on the display:
• INTERNAL
• EXTERNAL
• Using keys and
• The display shows the confirmed option and restores the menu GENERAL OPTIONS
• The following options are available:
• "BACK": Press key F1 to restore the menu GENERAL OPTIONS
• "MENU": Press key F3 to restore the MAIN MENU
9.2 Limited Door Reversal Activation by means of the Handset
• See § 6.3 for the meaning of this parameter
• Using keys and
LIMITED DOOR REVERSAL
• Press the "OK" key to confirm the choice
• The following options are viewed on the display:
• OFF
• ON
• Using keys and
• The display shows the confirmed option and restores the menu GENERAL OPTIONS
• The following options are available:
• "BACK": Press key F1 to restore the menu GENERAL OPTIONS
• "MENU": Press key F3 to restore the MAIN MENU
9.3 Activation of the Main Lift Controller Test by means of the Handset
• See § 6.4 for the meaning of this parameter
• Using keys and
w w w . s e m a t i c . c o m
and choose the required language and confirm with the
run through the MAIN MENU and choose GENERAL OPTIONS
run through the GENERAL OPTIONS and choose the option
choose the required option and press the "OK" key to confirm it
run through the GENERAL OPTIONS and choose the option
choose the required option and press the "OK" key to confirm it
run through the GENERAL OPTIONS and choose the option MAIN
32
© SEMATIC
infosem@sematic.com Changes can be made without notice
see www.sematic.com for latest release
All rights reserved