sematic DRIVE SYSTEM Bedienungsanleitung Seite 7

7.2 Self-learning cycle with the door controller only
(without using the handset)
8 INSTRUCTIONS WITH THE HANDSET
8.1 Handset (optional)
8.2 User Handset menus and submenus
8.3 Self-learning cycle activation by means of the handset
8.4 Reversing System Force setting by means of the handset
8.5 Speed Profile and High Speed adjustments by means of the Handset
8.5.1 Option "Fast settings"
8.6 Option "Set Factory Default"
8.7 Option "Manufacturer Menu"
8.8 Option "Advanced Settings"
8.8.1 Option "Opening Parameters"
8.8.2 Option "Closing Parameters"
8.8.3 Option "Change Password"
9 GENERAL OPTIONS CON L'UTILIZZO DEL TASTIERINO
9.1 Reversing System Setting by means of the Handset
9.2 Limited Door Reversal Activation by means of the Handset
9.3 Activation of the Main Lift Controller Test by means of the Handset
9.4 Activation of the Main Lift Failure by means of the Handset
9.5 Main Lift Controller Alarm - (MLC Input Alarm)
9.6 Activation of the Car Door Locking Device setting by means of the Handset
9.7 Activation of the Glazed Paneled Doors setting by means of the Handset
9.8 AUX Output Relay setting by means of the Handset
9.9 Fire Fighting Option setting by means of the Handset
9.10 EOD Timeout setting by means of the Handset
9.11 Protective Device Logic Kn setting by means of the Handset
9.12 Closing Rotation
10 MAINTENANCE MENU - DIAGNOSTICS AND ALARM MANAGEMENT
10.1 Consulting the Maintenance Menu with the Handset
11 CONTROLLER SOFTWARE UPGRADE
12 DOOR OPERATOR MAINTENANCE
13 SPARE PARTS
w w w . s e m a t i c . c o m
6
infosem@sematic.com
pag.
pag.
pag.
pag.
38
pag.
pag.
© SEMATIC All rights reserved
Changes can be made without notice
see www.sematic.com for latest release
26
32
36
38
38