sematic DRIVE SYSTEM Bedienungsanleitung Seite 34

LIFT CONTROLLER TEST
• Press the "OK" key to confirm the choice
• The following options are viewed on the display:
• WHEN MOVING
• WHEN MOVING+PARKING
• OFF
• Using keys and
• The display shows the confirmed option and restores the menu GENERAL OPTIONS
• The following options are available:
• "BACK": Press key F1 to restore the menu GENERAL OPTIONS
• "MENU": Press key F3 to restore the MAIN MENU
9.4 Activation of the Main Lift Failure by means of the Handset
• See § 6.4.3 for the meaning of this parameter
• Using keys
NO MLC SIGNAL
• Press the "OK" key to confirm the choice
• The following options are viewed on the display:
• IMMEDIATELY STOP
• LOW SPEED + STOP
• LOW SPEED CYCLE
• Using keys and
• The display shows the confirmed option and restores the menu GENERAL OPTIONS
• The following options are available:
• "BACK": Press key F1 to restore the menu GENERAL OPTIONS
• "MENU": Press key F3 to restore the MAIN MENU
9.5 Main Lift Controller Alarm - (MLC Input Alarm)
• See § 6.4.4 for the meaning of this parameter
• Using keys and
INPUT ALARM
• Press key "OK" to confirm the choice
• The following options are viewed on the display:
• OFF
• ON
• Using keys and
• The display shows the confirmed option and restores the menu GENERAL OPTIONS
• The following options are available:
• "BACK": Press key F1 to restore the menu GENERAL OPTIONS
• "MENU": Press key F3 to restore the MAIN MENU
9.6 Activation of the Car Door Locking Device setting by means of the Handset
• See § 6.5 for the meaning of this parameter
• Using keys and
DOOR LOCKING DEVICE;
• Press key "OK" to confirm the choice
• The following options are viewed on the display:
• OFF
• ON
• Using keys and
• The display shows the confirmed option and restores the menu GENERAL OPTIONS
• The following options are available:
• "BACK": Press key F1 to restore the menu GENERAL OPTIONS
• "MENU": Press key F3 to restore the MAIN MENU
© SEMATIC All rights reserved
Changes can be made without notice
see www.sematic.com for latest release
choose the required option and press the "OK" key to confirm it
and run through the GENERAL OPTIONS and choose the option
choose the required option and press the "OK" key to confirm it
, run through the GENERAL OPTIONS and choose the option MLC
, choose the required option and press the "OK" key to confirm it
, run through the GENERAL OPTIONS and choose the option CAR
, choose the required option and press the "OK" key to confirm it
infosem@sematic.com
33
w w w . s e m a t i c . c o m