Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
SET FACTORY DEFAULT
•
MANUFACTURER MENU
•
Using keys
and
"SET FACTORY DEFAULT".
•
Using the "OK" key, confirm the option
8.7 Option "Manufacturer Menu"
•
Connect the handset to RJ45 connector
•
If necessary, using keys
"OK" key or confirm the suggested language with "OK"
•
Using keys
and
•
Press the "OK" key to confirm the option
•
On the display the following options are viewed:
•
FAST SETTING
•
REVERSING SYSTEM FORCE
•
ADVANCED SETTINGS
•
SET FACTORY DEFAULT
•
MANUFACTURER MENU
•
Using keys
and
the option MANUFACTURER MENU
•
Using the "OK" key, confirm the option
After confirming the choice by pressing the "OK" key, a 5-code password is required on the
display. This selection is reserved for factory use only.
Use keys
and
keys
and
.
8.8 Option "Advanced Settings"
•
Connect the handset to RJ45 connector
•
If necessary, using keys
"OK" key or confirm the suggested language with "OK"
•
Using keys
and
•
Press the "OK" key to confirm the option
•
On the display the following options are viewed:
•
FAST SETTING
•
REVERSING SYSTEM FORCE
•
ADVANCED SETTINGS
•
SET FACTORY DEFAULT
•
MANUFACTURER MENU
•
Using keys
and
option ADVANCED SETTINGS
•
Using the "OK" key, confirm the option
After confirming the choice by pressing the "OK" key, a 5-code password is required
on the display. The factory default access code is 00001.
Use keys
and
keys
and
; Press OK at the end.
The following options are viewed on the display:
•
OPENING PARAMETERS
•
CLOSING PARAMETERS
•
SERIAL BUS SETTING
•
CHANGE PASSWORD
•
SAVE SET DATA
•
RECALL SET DATA
•
Using keys
and
•
Using the "OK" key, confirm the option
w w w . s e m a t i c . c o m
run through the menu "PROFILE SETTING" and choose the option
and
choose the required language and confirm with the
run through the MAIN MENU and choose PROFILE SETTING
run through the menu "PROFILE SETTING" and choose
to insert the codes; to select the required code and modify its value use
and
choose the required language and confirm with the
run through the MAIN MENU and choose PROFILE SETTING;
run through the menu "PROFILE SETTING" and choose the
to moves to different digits and to select the necessary coded digit use
run through the menu and choose the required option
30
infosem@sematic.com
© SEMATIC
All rights reserved
Changes can be made without notice
see www.sematic.com for latest release
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
