TCM 3000
1.1 Operations and functions
The Micromotor system TCM3000 is used in:
•
Implantology
•
Maxillofacial Surgery
•
Micro Surgery
•
Prothesis
•
ENT Surgery
•
Plastic Surgery
•
Neurosurgery
•
Hand Surgery
•
Veterinary
A microprocessor controls and optimizes all the functions.
The TCM 3000 can be used in three different ways, it can be used without pedal, with foot switch
or with a variable speed pedal. The Micromotor 31S has a standard E-Type adapter that accepts
any E-type contra angle and handpiece (E-Fitting).
1.2 Technical Data
Voltage: .............................................................. 115V∼/ 50-60Hz or 230V∼/ 50-60Hz (see device label!)
Power: ............................................................................................................................................130 VA
Type: ....................................................................................................................................................... B
Speed: ....................................................................................................................... 2,000 – 30,000 rpm
Dimension (WxHxD):...................................................................................................85 x 100 x 170 mm
Net weight: .......................................................................................................................................1,9 kg
1.3 Symbols
: Consult manual before use
: Type B applied part
2
1 Description
1275 : Conforms to EU standards
NOUVAG AG
: Old electrical and electronic
equipment must be disposed
separately and may not be
included in regular domestic
waste.
No. 31891 31/05