Description; Operations And Functions; Technical Data; Operating Environment - Nouvag MD 10 Bedienungsanleitung

MD 10

1.1 Operations and functions

The MD10 is used in Implantology and microsurgery. The unit is designed for drilling, screwing and
sawing. A built-in irrigation system minimizes the heat generation of the rotating instruments in order to
reduce infections that can cause tissue damage.

1.2 Technical Data

Voltage: .................................................................... changeable: 230 V∼/ 50-60 Hz or115 V∼/ 50-60 Hz
Power: ........................................................................................................................................... 130 VA
Application of part: ...................................................................................................................... Type BF
Protection level: ............................................................................................................................ Class 1
Motor speed: ................................................................................................................ 500 – 40,000 rpm
Max. torque: ................................................................................................................................. 10 Ncm
Dimensions (WxHxD): ............................................................................................. 120 x 190 x 250 mm
Net weight: ......................................................................................................................................... 3 kg

1.3 Operating Environment

Relative Humidity: ....................... max. 80%
Temperature: ..............................10 to 40°C
Pressure: ........................... 800 to 1060hPa

1.5 Symbols

: Attention accompanying
documents
: Application of part type BF
1275 : Conforms to EU standards
: Certified by Canadian Standards
Association (CSA) for Canada and
USA
: Autoclavable at max. 134° C
2

1 Description

1.4 Transport and Storage Environment

Relative Humidity:............................. max. 90%
Temperature:..................................... 0 to 60° C
Pressure: .................................700 to 1060hPa
IP68
KB 1min on /
3min off
NOUVAG AG
: Watertight foot control
: Electronic motor short operation:
1min on 3min off
: Old electrical and electronic
equipment must be disposed
separately and may not be
included in regular domestic
waste.
No. 31820 22/07