Use And Operation; Technical Data; Ambient Conditions For Operation; Device Symbols - Nouvag MD20 Bedienungsanleitung

MD20

1.1 Use and operation

The microprocessor-controlled MD20 is used in implantology and microsurgery. The device is
designed for bone drilling, screwing and sawing. The MD20 includes a hose pump for the cooling of
rotating instruments for the prevention of tissue damage.

1.2 Technical data

Voltage: ............................................................................ switchable: 100 V ∼ / 115 V ∼ / 230 V ∼ , 50-60 Hz
Power supply fuse: ...................................................................................................................... 2 x T2A
Power: ............................................................................................................................................160 VA
Application component: ............................................................................................................... Type BF
Class of protection: ........................................................................................................................Class II
Motor rotational speed: ..................................................................................................500 - 40´000 rpm
Max. motor torque: ....................................................................................................................... 10 Ncm
Mass (HxWxD): ........................................................................................................135 x 285 x 260 mm
Net weight: ..........................................................................................................................................6 kg
Printer: ......................................................................................................................................DPT100-S
1.3.

Ambient conditions for operation

Rel. air humidity: ................................. max. 80%
Temperature: ..................................... 10 to 40° C
Air pressure: ..............................800 to 1060hPa
1.5.

Device symbols

: Caution: refer to enclosed
documentation
: Application component of type BF
1275 : EU conformity symbol
: Class II equipment
: Certified by Canadian Standards
Association (CSA) for Canada
and USA
2

1 Product description

1.4.
Rel. air humidity:................................. max. 90%
Temperature:........................................0 to 60° C
Air pressure: ............................. 700 to 1060 hPa
IP68
1min on /
3min off
NOUVAG AG
Ambient conditions for transport
and storage
: Functional earth terminal
: Autoclavable up to max. 134° C
: Watertight footpedal
: continuous operation with
intermittent loading
1min on, 3min off
: Old electrical and electronic
equipment must be disposed
separately and may not be
included in regular domestic
waste.
No. 31842 14/06