Envelope And Document Set Specifications - FP FPi 4700 Betriebsanleitung

Envelope and Document Set Specifications

A
Minimum
160 mm
size
6.3"
Maximum
248 mm
size
9.7"
* Booklets up to approximately 1 mm (0.04 inch) thickness, depending on stiffness
** When insert is more than 1 mm (0.04 inch): A-15 mm / A-0.6 inch
Remarks:
• The specification of the paper handling equipment is often wider than that of the
envelopes and documents handled. The condition of material handled will limit the
specified environmental conditions.
• We recommend that materials to be handled are stored at a temperature of 20°C
(68°F) with a relative humidity factor of 50%. If difference in temperature occurs
between store room and mailing area, the material has to be stored near the machine
at least 24 hours before use.
• Self-copying paper may cause rubber parts to wear quicker. The rubber used in this
machine has the best resistance to Wiggins Teape material.
B C
90 mm 32 mm
3.5" 1.25"
162 mm B-32
6.38" B-1.25
D E
10 mm 130 mm
0.4" 5.1"
75 mm A-12*
2.9" A-0.47**
F G
60 g/m2
84 mm
3.3"
B-6 2.5 mm
B-0.2 0.1"
117
10