FP FPi 4700 Betriebsanleitung Seite 55

Load Documents (maxiFeeder)
To load documents:
4
The feeding plate assembly will be shifted up automatically (when the system starts
processing) until documents/BREs are underneath the rubber paper pullers.
1. Squeeze the two blue handles A and B.
2. Shift the feeding plate assembly C to the rear position.
3. Loosen the stack of documents and place them in the feeder tray.
BREs with flap down and leading (top side pointing to system).
50
When loading the maxiFeeder, make sure that the document/BREs
are positioned parallel in relation to the feeding plate assembly to
ensure correct feeding.
In case of long documents, use the feeding plate extension B to
support the documents.