Load Envelopes - FP FPi 4700 Betriebsanleitung

Load Documents (HCDF)
To load the document feeder tray:
4
1. Pull down lever A.
The feeder rollers C move up to filling level.
2. Place a stack of documents between the side guides (max. 725 sheets, 80 g/m²).
See Document Orientation
3. Release lever A.

Load Envelopes

Before you load the envelopes, make sure the envelope separation and side guides are
correctly set as described in
1. Loosen the stack of envelopes and place the stack on top of the bottom envelope.
52
how to place the documents in the feeder tray.
Adjusting the Side Guides and Envelope Separation.