Bcr Code Description - FP FPi 4700 Betriebsanleitung

BCR Code Description

Bar codes are used for mail sets that are processed in Document Systems. The bar codes
tell the system if:
• The document set is complete
• The envelope should be sealed
• Enclosures should be added
• Etc.
Barcode can be printed vertically and horizontally. Two types of barcodes are supported,
1D and 2D barcodes (depending on installed licenses).
Supported 1D barcodes
• Code 39
• Code 128
• Interleaved 2 of 5
• Minimum line thickness of a bar: 0.25 mm (0.01 inch)
• The thickness ratio of thick bars versus thin bars: 2.2
• Minimum width of the barcode: 5 mm (0.2 inch)
• The white area in the picture shows the limits where the code can be printed
7
81