FP FPi 4700 Betriebsanleitung Seite 73

4. Tap [Start test].
5. When the test is finished, the Status report is shown, showing a list of all problems
found during diagnostics. If tests fail, contact your service organization.
5
When too much paper dust is built up at the sensors a warning message will be displayed.
To check the conditions of the photocells or to calibrate them follow the instructions as
described in Calibrate
Reading
The reading menu contains the configuration items for the reading functions. Because
reading is optional, this menu is only available when there is at least one reading license
present. For more information on the reading option, see Reading.
The Reading OMR code definition screen shows the configuration of the system for OMR.
For every OMR code option, it shows if it is on or off. If it is on, the screen shows information
on what the system does, when it reads a mark or no mark.
68
Maintenance
photocells.
OMR Code Definition