FP FPi 4700 Betriebsanleitung Seite 128

Flexcode An OMR/BCR code for which the meaning of the marks can be pro-
OMR/BCR grammed in a dedicated way for a specific customer. This is normally
used to support the OMR/BCR codes from other suppliers.
Feeder The Feeder is the feeding part of the system.
High Capacity Optional feeder with a capacity for up to 725 sheets.
Document Feed-
er (HCDF)
High Capacity Optional stacker that is mounted on the exit of the system, to stack filled
Vertical Stacker envelopes.
(HCVS)
Insert
Inserter An Inserter is the Module where the document-set is inserted into the
envelope, the envelope is closed and if necessary sealed.
Inserting system The system of all the Modules that cooperate to perform the inserting
function (accumulate document-set, fold and insert) and have a single
point of control.
Divert area To avoid stoppages the Divert area diverts duplicate on faulty documents
before folding them while the system is still running.
Job
A job is an actually produced collection of mail-sets based on a certain
Job Definition at a certain point in time for a specific purpose. It consists
of:
Job counter The counter that registers the number of mail-sets that is produced as
part of a specific job.
Letter fold See C-fold.
Linking See Feeder Linking.
Loc The Loc is the unit in the system that transports the envelope just after
the document was inserted. It is called Loc (short for locomotive) as the
early developments had a straight cover and a number of transportation
rollers sticking out. This made it look like a locomotive from the side. In
the current systems the loc also carries the brush holder and sealing
rollers.
maxiFeeder Feeder with high capacity feed tray (e.g. 1200 sheets A4 80gr).
• An insert is the action of inserting a document-set into an envel-
ope.
• For native English speaking customers an insert is also a short,
not to be folded document, usually an enclosure.
• The Job definition used for the production
• Information about the batch size
11
123