FP FPi 4700 Betriebsanleitung Seite 29

2. Select a predefined document or
If you want to remove an enclosure from the job, or change the order of the enclosures,
see Delete or move an
3. Change the [Number] for more than one document from a feeder.
4. Confirm the enclosure settings with [OK].
Continue with the fold settings (see
3
Fold Settings
Default the machine suggests the most logical fold type. This fold type is highlighted.
However, you can select other fold types and change their settings.
1. Tap a fold type.
2. If necessary, tap [Settings] to change the fold settings.
3. Tap [>].
If you want to revert to the machine recommended fold type, switch [Use recommended
fold] to On.
Continue with the exit settings (see
24
create a custom document
enclosure.
Fold settings).
Exit settings).
as your enclosure.