FP FPi 4700 Betriebsanleitung Seite 52

3. Loosen the knob B half a turn.
4. Grab the side guides in the middle and push them apart as far as possible.
5. Put a small stack of documents between the side guides.
6. Grab the side guides in the middle and push them towards the documents.The space
between the side guides and the documents should be such that the documents have
just enough play to move freely.
7. Re-tighten knob B.
8. Remove the stack of documents.
9. Replace the document feeder tray (see
45).
Load Documents
Fill the document feeder tray as follows:
1. Open the left-hand side guide A by turning it downwards.
The feed rollers will automatically be lifted.
Installing the Document Feeder Trays
4
on page
47