Document Separation - FP FPi 4700 Betriebsanleitung

2. Place a stack of documents between the side guides.
3. Turn the left side guide upwards again.

Document Separation

The term 'Document separation' refers to the adjustment required for separating the upper
document from the rest of the documents in the stack. This prevents pulling too much
4 documents from the stack at the same time.
The document separation for the automatic feeders is set automatically; there are no manual
adjustments needed.
Feeders 1 and 2 (the feeders in the two lowest positions) can be special feeders. The
document separation for special feeders must be adjusted manually. While special feeder
trays fit in all positions, adjusting the separation is only possible when they are fitted on
position 1 and 2.
To adjust the separation of special feeders follow the instructions as described in
mail sets with glossy
maxiFeeder
Adjust the maxiFeeder Side Guides
Adjust the side guides:
1. Take a stack of documents/BREs and place them in the feeder tray.
BREs with flap down and leading (top side pointing to system).
48
material.
Processing