Ottobock 5A60-Varos Gebrauchsanweisung Seite 30

► If the product is to be used on another patient, it first has to be cleaned with a damp cloth
and mild detergent (e.g. 453H10=1 Ottobock DermaClean) and disinfected.
If a surface disinfection process using an alcohol-based disinfectant without additional addit­
►
ives, for example "Terallin liquid", is used for disinfection, the application instructions and
safety notices of the disinfectant manufacturer have to be observed.
CAUTION
Risk of pinching when inserting the liner into the socket
Injury due to powerful magnetic attraction between the magnetic cap of the matching 6Y200=*
Varos liner and the magnetic bottom shell of the product.
► When inserting the liner into the socket, ensure that no fingers/body parts are between the
liner and socket.
CAUTION
Storage of the product in direct sunlight
> Falling due to the breakage of load-bearing components caused by plastic parts of the
product becoming brittle due to UV exposure.
> Discolouration of plastic parts.
► Avoid storing the product in direct sunlight.
CAUTION
Contact of the product with embers or fire
Injuries due to contact with molten material.
► Keep the product away from embers and open flames.
CAUTION
Incorrectly secured screws
Falling due to breakage of load-bearing components caused by screw connections coming
loose.
► Observe the specified torque values.
► Observe the instructions for securing the screw connections.
CAUTION
Use of a damaged product
Falling due to breakage of load-bearing components or malfunction of the product.
Regularly check the socket, Boa cable, Boa dials, socket brim pad and fabric or plastic
►
adhesive strips for wear and tear or damage.
► If components are damaged or a Boa cable is torn, the socket has to be repaired by quali­
fied personnel.
NOTICE
Improper product care
Damage to the product due to the use of incorrect cleaning agents.
► Only clean the product with a damp cloth and mild soap (e.g. 453H10=1 Ottobock Der­
maClean).
30