Product Description; Intended Use; Instructions For Use; Combination Possibilities - Ottobock 3R67 Gebrauchsanweisung

2 Product description

The product (3R67) has the following key features:
• Polycentric prosthetic knee joint
• Product components for stance phase stability
- Polycentric kinematics
• Product components for swing phase control:
- Separately adjustable, hydraulic damping for extension and flexion

3 Intended use

3.1 Indications for use
The product is to be used solely for lower limb prosthetic fittings.
3.2 Area of application
CAUTION
Excessive strain on the product
Fall due to breakage of load-bearing components
Only use the product according to its allowable field of application.
►
Allowable amputation types
Knee disarticulation, Transfemoral amputation
Allowable field of application
Children's prosthesis (Everyday prosthesis)
Positioning in the prosthesis
Only according to the sections and illustrations in the instructions for use
Allowable body weight
See item number
Allowable body height
See item number
Allowable foot size
See item number

3.3 Combination possibilities

CAUTION
Failure to observe the manufacturer requirements regarding combination possibilities
Injuries, malfunctions or product damage due to unallowable combination of prosthesis com­
ponents
► Based on the instructions for use of all prosthetic components used, verify that they may be
combined with each other and are approved for the patient's field of application.
► Contact the manufacturer with questions.
INFORMATION
In a prosthesis, all prosthetic components have to meet the patient's requirements regarding the
amputation level, body weight, activity level, environmental conditions and field of application.

3.4 Environmental conditions

CAUTION
Use under unallowable environmental conditions
Fall due to damaged product
20
2
in Figure "Technical data" on page 3
2
in Figure "Technical data" on page 3
2
in Figure "Technical data" on page 3