Getting Started; Checking The Contents Of The Packing Box - struers Discotom 65 Gebrauchsanweisung

Checking the Contents
of the Packing Box
Unpacking Discotom
Placing Discotom
Discotom-60 /-65
Instruction Manual

1. Getting Started

In the packing box you should find the following parts:
1 Fork spanner (24 mm) for cut-off wheel
1 Connector pipe for water outlet
3 Elbow pipes for water outlet
1 Outlet hose 2 m,
for connection to external cooling unit
3 Hose clamps, 35-60 mm
1 Grease for maintenance/lubrication of the spindle
1 Oil for maintenance of cutting table
1 Set of Instruction Manuals
 Remove the bolts from all of the transport brackets that secure the
Discotom to its transport pallet.
 Remove the brackets.
Discotom should be placed on a table strong enough to support a
minimum of 171 kg/ 377 lbs.
Struers recommends the use of the Table Unit, which is designed for
use with Discotom machines, see "Accessories".
3