Selecting The Mode - hanseatic AC928A2CA Gebrauchsanleitung

Page EN-20 Operation
Fire hazard!
Any improper use of the appliance can
lead to fi re.
In case of a fi re or smoke in the cook-
■
ing chamber: do not open the cook-
ing chamber door! Switch off the ap-
pliance, pull the mains plug out of the
socket or switch off /remove the fuse.
Ensure suffi cient ventilation. Do not
■
cover the ventilation openings, e.g.
with a dish cloth etc.
Burn hazard from steam!
Steam is generated through the build-
up of heat within the appliance when
cooking dishes and can scald if it comes
into contact with the skin.
Avoid coming into contact with the
■
hot steam when the appliance is run-
ning.
Ensure that, when opening the door,
■
you do not come into contact with
the hot steam rising inside the cook-
ing chamber.
NOTICE
Risk of damage to property!
Improper handling of the appliance
may result in damage.
The appliance must never be operated
■
without the glass rotary plate or foods/
liquids!
A mild odour can form during the
fi rst time the device is used. This is
non-toxic and disappears after a short
moment.

Selecting the mode

The appliance provides the following modes
which can be set manually:
1. Press the 'Heating mode' button (23) .
A beep will sound. The
appear on the display and P100 will flash.
2. Turn the control dial (4) or press the
'Heating mode' button until the desired
heating mode is displayed.
3. Press the button (25) to confirm the
mode. Press the respective mode button
once.
The operating modes are shown on the dis-
play in the form of different symbols and in-
formation.
Function Description
Microwave Normal microwave
mode without additional
functions with various
P100, P80, P50, power levels.
P30, P10
Convection Convection
140-230 ыC
Grill Grill mode
G-1
Combi mode Microwave and convec-
tion modes combined
,
C-1
Combi mode Microwave and grill
modes combined
,
C-2
Combi mode Convection and grill
modes combined
,
C-3
symbol will then