Herunterladen Inhalt Inhalt Diese Seite drucken

Moving And Unpacking; Setting Up The Appliance/The Correct Set-Up Location - hanseatic AM720KFR-P00E Gebrauchsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Page EN-30
Getting started
Do not put the appliance in a closet.
Never remove the cover that is fas-
tened inside the cooking chamber!
It serves to protect the magnetron,
which emits the microwaves.
Do not operate the appliance with an
external timer or a separate remote
control system.
If smoke is emitted, turn off or unplug
the appliance and keep the cooking
chamber door closed to smother any
fl ames.
NOTICE
Improper handling of the appliance
may result in damage.
Do not use sharp objects to unpack
the appliance.

Moving and unpacking

• Move the appliance using a trolley or with
the help of a second person.
• Carefully unpack the appliance and re-
move all packaging, plastic moulding, ad-
hesive strips and foam padding from the
inside, outside and back of the appliance.
Setting up the appliance/the
correct set-up location
• Place the appliance on as flat and as firm
and heat-resistant a base as possible.
• Take into account the following points:
– The device should not be positioned di-
rectly next to a refrigerator or deep freez-
er. The heat emitted from the device
would cause unnecessarily higher ener-
gy consumption by the fridge or freezer.
– There must be a minimum spacing of 2
m from radio devices and televisions, to
ensure that the reception is not distorted.
– The base upon which the device should
be positioned must be level, sufficiently
stable and heat resistant.
– Never remove the adjustable feet.
– When selecting a location for the device,
please ensure to choose a place away
from heat, steam or high air humidity.
The device may not be used outdoors.
– Please ensure that no highly flammable
materials are located in the vicinity of the
device.
– The socket must be near the device and
easily reachable, to allow the plug to be
pulled out quickly in the event of any
malfunction.
– In order to ensure sufficient air circula-
tion, the following minimum lateral and
vertical distances must be complied with:
Upwards:
Backwards:
To the left:
To the right:
– As measured from the base, the
installation height must be at least 85 cm.
30 cm
0 cm
20 cm
20 cm

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis